My Store:

  Call My Store @ 

  Map My Store

Industry - Applications Groups

High Performance Plastics TOP

Radel® is a semi-transparent, high-performance thermoplastic that offers ...

The Ultem®* 1000 series (unreinforced grade) is a high-performance plastic ...

Stock shapes extruded from Ardel® resin are specifically formulated to endure ...

Manufactured with Tefzel®, a resin that has improved mechanical properties ...

FEP is a fluoropolymer with excellent physical and chemical properties.

PCTFE (formerly marketed by 3M as Kel-F 81) is a high-performance thermoplastic.

PFA is a fluoropolymer with most of the physical and chemical properties of ...

Duratron® is a fully imidized thermoset polyimide.

Duratron LSG PEI is an amorphous polymer based on Ultem(®PEI resin. It offers ...

Outstanding electrical and physical properties combined with hydrolytic ...

Duratron® 4203 extruded PAI offers excellent compressive strength and the ...

This Duratron® PAI is primarily used for wear and friction parts.

Duratron® 4501 PAI is well suited for general purpose wear and friction parts.

This grade is commonly used for dies and patterns of formed metal parts or as ...

This seal and bearing grade offers a very low coefficient of friction and good ...

Duratron® 5530 is 30% glass reinforced, compression molded PAI.

Duratron U2100, U2200 and U2300 PEI are glass-reinforced versions (10, 20, and ...

Unreinforced Duratron® XP polyimide is produced from high purity resin with ...

Fluorglas Fabrics are woven fiberglass primarily with Teflon® (PTFE) ...

Fluorosint® 207's unmatched dimensional stability, excellent creep resistance ...

Fluorosint® 500 has nine times greater resistance to deformation under load ...

FDA compliant, Fluorosint HPV PTFE is a high performance bearing material ...

Fluorosint MT-01 PTFE is an extreme grade that provides stability at elevated ...

Engineering thermoplastic composite reinforced with Levlar® Aramid fiber.

Quadrant developed Ketron 1000 LSG PEEK for applications in contact with bodily ...

This Life Science Grade of PEEK has 30% carbon fiber reinforcement that ...

The addition of glass fibers significantly reduces the expansion rate and ...

PEEK is a high performance semi-crystalline thermplastic.

Ketron® PEEK grades offer chemical and hydrolysis resistance similar to PPS, ...

This general purpose grade is unreinforced and offers the highest elongation ...

Compression molded 30% Glass fiber reinforced polyetheretherketone.

The addition of carbon fibers enhances the compressive strength and stiffness ...

The addition of glass fibers significantly reduces the expansion rate and ...

Carbon fiber reinforced with graphite and PTFE lubricants, our newest grade of ...

Developed as a Life Science Grade for applications in contact with bodily ...

Manufactured from Kynar® polyvinylidene fluoride resin.

Kytec® polyvinylidene fluoride, the homopolymer of 1, 1-difluoroethene, is a ...

Quadrant® LSG polycarbonate stock shapes produced from selected batches of ...

Life Science Grade Polyphenylsulfone

Life Science Grade Polysulfone

Norylux™ modified PPO is a strong engineering plastic with outstanding ...

PEEK is a high performance semi-crystalline thermoplastic.

PEEK is a high performance semi-crystalline thermoplastic.

High resistance to heat and combustibility, low smoke emission, and ...

PES film possesses a combination of properties such as high resistance to heat ...

This product provides extremely high resistance to corrosion and chemicals.

Polytetrafluoroethylene

Made from KYNAR® polyvinylidene fluoride resin.

PVDF is strong and tough as reflected by its tensile properties and impact ...

Stock shapes extruded from Radel® R resins offer a superior combination of ...

Radel® R polyphenylsulfone (PAES) is an amorphous high performance ...

Rexolite® is a rigid and transparent plastic produced by crosslinking ...

Rulon® materials are used in bearing and seal applications from temperature ...

Modified Rulon® LR designed to increase the mechanical properties for slightly ...

Semitron® ESd 410C is ideal for handling integrated circuits through the test ...

Semitron® ESd 420 is ideal for handling integrated circuits through the test ...

Semitron® MP 370 offers more choices in the design and manufacture of ...

Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR offers an ...

Semitron® ESd 520 HR is ideal for handling integrated circuits through the ...

Semitron® MDS 100 has a remarkable combination of strength, stiffness and ...

Semitron® MP 370 offers more choices in the design and manufacture of ...

Techtron® HPV exhibits excellent wear resistance and a low coefficient of ...

Unlike filled PPS products, Techtron® PPS is easily machined to close ...

Compression molded 40% glass fiber reinforced Ryton polyphenylene sulfide.

Material Notes: Bearing grade, compression molded Techtron® polyphenylene ...

An amorphous thermoplastic polyetherimide, stock shapes from ULTEM® resin ...

Non-sloughing carbon-fiber-filled material which is extremely strong and stiff, ...

Tempalux® offers high heat resistance coupled with high strength, stiffness, ...

Made from Udel® polysulfone resin, these stock shapes remain stable, resisting ...

Thermalux® is a tough, rigid, high-strength, amorphous thermoplastic that ...

TPX is a lightweight, high temperature polyolefin with exceptional acoustical ...

TPX has a remarkable and unique combination of transparency and resistance to ...

Udel® polysulfone is an amber semi-transparent, heat-resistant, high ...

PEI is an amorphous polymer offering high strength and excellent flame ...

Vespel® parts provide a unique combination of the physical properties of ...

PTFE is one of the most thermally stable plastic materials.

Zelux® polycarbonate is an engineering plastic with excellent dimensional ...

SEARCH PRODUCTS


 

Advanced Search

JOIN OUR LIST


Get info on product updates, clearance items, and more...