|   
| MATERIAL PROPERTY COMPARISON | | Static Dissipative Materials | | | | Units | Test
Method
ASTM | ESD ACETAL | Semitron ESD 410C | Semitron ESD 500 | Semitron ESD 520HR | FR Polypropylene | | Product Description | | | Static Dissipative Acetal | Static Control Polyetherimide | Static Dissipative Reinforced PTFE | Static Dissipative Reinforced PAI | Polypropylene |  | 1 Specific Gravity, 73°F | - | D792 | 1.33 | 1.41 | 2.30 | 1.58 | 1.38 | | 2 Tensile Strength, 73°F | psi | D638 | 6,100 | 9,000 | 1,500 | 12,000 | 2,500 | | 3 Tensile Modulus of Elasticity, 73°F | psi | D638 | 225,000 | 850,000 | 250,000 | 800,000 | - | | 4 Elongation, 73°F | % | D638 | 10 | 2 | 50 | 3.0% | 3.0% | | 5 Flexural Strength, 73°F | psi | D790 | 6,000 | 12,000 | 2,200 | 20,000 | - | | 6 Flexural Modulus of Elasticity, 73°F | psi | D790 | 190,000 | 850,000 | 350,000 | 850,000 | 400,000 | | 7 Shear Strength, 73°F | psi | D732 | - | - | 1,700 | - | - | | 8 Compressive Strength, 10% Deformation, 73°F | psi | D695 | - | 19,500 | 3,800 | 30,000 | - | | 9 Compressive Modulus of Elasticity, 73°F | psi | D695 | - | 600,000 | 225,000 | 600,000 | - | | 10 Coefficient of Friction (Dry vs Steel) Dynamic | - | PTS55007 | 0.29 | 0.18 | 0.10 | - | - | | 11 Hardness, Rockwell, Scale as noted, 73°F | - | D785 | M44(R109) | M115(R125) | R50 | M108 | - | | 12 Hardness, Durometer, Shore "D" Scale, 73°F | - | D2240 | - | - | D65 | - | 67 | | 13 Tensile Impact, 73°F | ft.lb/in2 | D1822 Type "S" | - | - | - | - | 8.0 | | 14 Izod Impact, 73°F | ft.lb/in. of notch | D256 Type "A" | 1.5 | 0.8 | 1.0 | .8 | - |  | 15 Coefficient of linear Thermal Expansion | | E-831 (TMA) | 9.3 x 10-5 | 1.8 x 10-5 | 5.7 x 10-5 | 1.5 x 10-5 | 248/66psi | | 16 Heat Deflection Temperature, 264psi | in./in./°F | D648 | 225 | 410 | 210 | 520 | - | | 17 Tg-Glass Transition (amorphous) | °F | D3418 | N/A | - | N/A | N/A | - | | 18 Melting Point (crystalline) | °F | D3418 | - | N/A | 621 | - | - | | 19 Continuous Service Temperature in Air (Max.) | °F | - | 180 | 338 | 500 | 500 | - |  | 20 Dielectric Strength, Short Term | °F | D149(2) | - | - | - | - | - | | 21 Surface Resistivity | Volts/mil | D257 | 1010 x1012 | 104 x106 | 1010 x1012 | 1010 x1012 | - | | 22 Static Decay, Mil-B-8170C | ohms/sq. | FTM4046.1 | <2.0 | <2.0 | <2.0 | <2.0 | - | | 23 Volume Resistivity | seconds,ma | D257 | 1010 x 1012 | 104 x 106 | 1010 x 1012 | 1012 x 1012 | - | | 24 Dielectric Constant, 106 Hz | x. | D150(2) | - | - | - | - | - | | 25 Dissipation Factor, 106 Hz | ohm-cm | D150(2) | - | - | - | - | - | | 26 Water Absorption, 24 hrs | - | D570 | 2.0 | 0.3 | 0.03 | 0.6 | - |  | 27 UL-94 @ 3.1 mm (1/8in.) Est. rating based on available data | - | UL94 | HB | V-0 | V-0 | V-0 | V-O- 5VA | | 28 FM 4910 Compliant | % 73°F | listing # x 92 | | | | | Yes | | 29 Ionic impurities (Destructive Ash Method) | 0 | 0 | - | - | - | - | - | | Na (Sodium) | - | 0 | - | - | 61 | - | - | | K (Potassium) | ppm | 0 | - | - | 17,000 | - | - | | Fe (Iron) | 0 | 0 | - | - | 69 | - | - | | 30 Outgassing | 0 | E595 | - | - | - | - | - | | TML (Total Mass Loss) | 0 | 0 | - | - | 0.04 | - | - | | CVCM (Collected Volatile Condensable Material) | % | 0 | - | - | 0.00 | - | - | | WVR (water vapor regained) | 0 | 0 | - | - | 0.01 | - | - | RED SHADED PRODUCTS ARE NEW ADVANCED ENGINEERING THERMOPLASTIC SPECIALLY DEVELOPED FOR THE SEMICONDUCTOR INDUSTRY |