High Performance

Ketron® LSG PEEK

Quadrant developed Ketron 1000 LSG PEEK for applications in contact with bodily fluids for no more than 24 hours.


Ketron® CA30 LSG PEEK

This Life Science Grade of PEEK has 30% carbon fiber reinforcement that enhances its compressive strength and stiffness and dramatically lowers its thermal expansion rate.

Altron™ LSG PC

Quadrant® LSG polycarbonate stock shapes produced from selected batches of clear, non-UV-stabilized polycarbonate resin offer good overall physical properties.


Ketron® CLASSIX LSG PEEK white

Developed as a Life Science Grade for applications in contact with bodily fluids for up to 30 days, KETRON® PEEK-CLASSIX LSG stock shapes are produced from Invibio® PEEK-CLASSIX White resin.

Techtron® PPS

Unlike filled PPS products, Techtron® PPS is easily machined to close tolerances.



Rexolite® is a rigid and transparent plastic produced by crosslinking polystyrene with divinylbenzene.

Tivar® 1000

An excellent general-purpose material, Tivar® 1000 (natural) is a cost-effective solution for food handling problems, and meets FDA, USDA and 3-A Dairy guidelines for food processing and handling.

Techtron® HPV

Techtron® HPV exhibits excellent wear resistance and a low coefficient of friction.

Techtron® PPS BG

Material Notes: Bearing grade, compression molded Techtron® polyphenylene sulfide.



Made from Udel® polysulfone resin, these stock shapes remain stable, resisting creep and deformation under continuous load and elevated temperatures.


Thermalux® Film

Thermalux® is a tough, rigid, high-strength, amorphous thermoplastic that maintains its properties over a wide temperature range.



Udel® polysulfone is an amber semi-transparent, heat-resistant, high performance engineering thermoplastic.


Norylux™ modified PPO is a strong engineering plastic with outstanding mechanical, thermal, and electrical properties.

Radel® R (Polyphenylsulfone)

Stock shapes extruded from Radel® R resins offer a superior combination of high performance properties that include excellent thermal stability, outstanding toughness, and good environmental stress cracking resistance.



Vespel® parts provide a unique combination of the physical properties of plastics, metals and ceramics.


TPX is a lightweight, high temperature polyolefin with exceptional acoustical and electrical properties.

Thermalux PES

High resistance to heat and combustibility, low smoke emission, and transparency are the combination of properties possessed by stock shapes extruded from PES.


PES Film

PES film possesses a combination of properties such as high resistance to heat and combustibility, low smoke emission and transparency.


An amorphous thermoplastic polyetherimide, stock shapes from ULTEM® resin possess a combination of useful characteristics, including high strength at elevated temperatures, high modulus, and broad chemical resistance.



PEEK is a high performance semi-crystalline thermoplastic.


Stock shapes extruded from Ardel® resin are specifically formulated to endure the damaging effects of UV light.



PEEK is a high performance semi-crystalline thermoplastic.


Ketron® PEEK (CM)

Ketron® PEEK grades offer chemical and hydrolysis resistance similar to PPS, but can operate at higher temperatures.

Ketron® 1000 PEEK

This general purpose grade is unreinforced and offers the highest elongation and toughness of all PEEK grades.

Rulon® LR PTFE

Modified Rulon® LR designed to increase the mechanical properties for slightly more load capacity with a corresponding decrease in flexibility.

Semitron® ESd 480 PEEK

Semitron® MP 370 offers more choices in the design and manufacture of precision test sockets for the semiconductor manufacture industry.

Semitron® MDS 100

Semitron® MDS 100 has a remarkable combination of strength, stiffness and stability


Kytec® polyvinylidene fluoride, the homopolymer of 1, 1-difluoroethene, is a tough engineering thermoplastic that offers a unique balance of properties.



PVDF is strong and tough as reflected by its tensile properties and impact strength.

Fluorosint® 500 PTFE

Fluorosint® 500 has nine times greater resistance to deformation under load than unfilled PTFE.


Fluorosint® 207 PTFE

Fluorosint® 207’s unmatched dimensional stability, excellent creep resistance and white color uniquely position this material to serve FDA regulated applications.

  • No categories