
Zelux® GS – Gamma Stabilized
ZELUX M® stress relieved rod and heavy gauge sheet products can be machined into a wide variety of parts that offer dimensional stability at temperatures from -40°F to 280°F.
ZELUX M® stress relieved rod and heavy gauge sheet products can be machined into a wide variety of parts that offer dimensional stability at temperatures from -40°F to 280°F.
PROPYLUX® CN-P is a conductive polypropylene. It is a carbon powder filled, lightweight material with good chemical resistance, and has low water absorption with surface
Tempalux® WM is a medical grade of polyetherimide (PEI). This transparent amber-colored amorphous thermoplastic exhibits excellent resistance to a wide range of chemicals and offers
Tempalux® GF 30 is a glass reinforced amorphous Polyetherimide (PEI) polymer. Tempalux® offers a combination of useful characteristics, including high dielectric strength, high strength at
Tempalux® GF20 is a glass reinforced amorphous Polyetherimide (PEI) polymer. Tempalux® offers a combination of useful characteristics, including high dielectric strength, high strength at elevated
Propylux® DS is made from a FDA compliant polypropylene resin. Its broad chemical resistance and food contact approved formulation makes it ideal for food and
Propylux® HS2 is Heat-Stabilized Sheet made from FDA, USP VI compliant polypropylene resin. Its broad chemical resistance, low moisture absorption, hydrolysis resistance, and toughness make
Propylux® HS is a medical grade and is made from an FDA, USP VI compliant polypropylene resin. Through a unique heat-stabilizing process, the extruded material
POMALUX® CN-P uses Acetal POM as a base resin. Acetal is an engineering thermoplastic used in precision parts requiring high stiffness, low friction and medium level dimensional
Non-carbon filled, permanently static-dissipative material.
Pomalux® is a high-performance acetal copolymer that has excellent mechanical, electrical, and wear properties.
Made from KYNAR® polyvinylidene fluoride resin.
Zelux® W (Window grade) sheet made from polycarbonate resin has many advantages over glass that make it an ideal replacement in almost any industrial situation.
ZELUX M® stress relieved rod and heavy gauge sheet products can be machined into a wide variety of parts that offer dimensional stability at temperatures from -40°F to 280°F.
ECTFE is resistant to strong bases, leaching, and permeation.
Free of fillers, lubricant, and plasticizers which could leach and contaminate.
Made from Polypropylene Resin Propylux® is a copolymer polypropylene product available in sheet.
HIPS is a low cost plastic material that is easy to machine and fabricate.
Lennite® UHMW-PE is a low friction engineering plastic with excellent chemical resistance and abrasive wear resistance.
Ultra Ethylux® is made from high density polyethylene resin.
Thermalux® is a tough, rigid, high-strength, amorphous thermoplastic that maintains its properties over a wide temperature range.
Made from Udel® polysulfone resin, these stock shapes remain stable, resisting creep and deformation under continuous load and elevated temperatures.
Stock shapes extruded from Radel® R resins offer a superior combination of high performance properties that include excellent thermal stability, outstanding toughness, and good environmental stress cracking resistance.
Norylux™ modified PPO is a strong engineering plastic with outstanding mechanical, thermal, and electrical properties.
TPX is a lightweight, high temperature polyolefin with exceptional acoustical and electrical properties.
PES film possesses a combination of properties such as high resistance to heat and combustibility, low smoke emission and transparency.
High resistance to heat and combustibility, low smoke emission, and transparency are the combination of properties possessed by stock shapes extruded from PES.
An amorphous thermoplastic polyetherimide, stock shapes from ULTEM® resin possess a combination of useful characteristics, including high strength at elevated temperatures, high modulus, and broad chemical resistance.
Stock shapes extruded from Ardel® resin are specifically formulated to endure the damaging effects of UV light.
PEEK is a high performance semi-crystalline thermoplastic.
PEEK is a high performance semi-crystalline thermoplastic.
Absylux® ABS is a low cost engineering plastic that is easy to machine and fabricate.
Non-carbon-filled, permanently static-dissipative material, with good chemical resistance and mechanical properties.
Carbon-powder-filled lightweight material with good chemical resistance, extremely low water absorption level, and high impact resistance (no break, notched or unnotched).
Carbon-powder-filled material with resistivity levels in the 10*7 – 10*11 range with high flexural strength and good thermal stability to 270°F.
The CN-P material is carbon-powder-filled, while the CN-SS is filled with small non-sloughing stainless steel fibers.
Non-sloughing carbon-fiber-filled material which is extremely strong and stiff with excellent dimensional stability.
Non-carbon-filled anti-static material which has high impact strength, good tensile and flexural strength, and is easily machined.
PVDF is strong and tough as reflected by its tensile properties and impact strength.
Manufactured from Kynar® polyvinylidene fluoride resin.
Dielux® PTFE filled acetal copolymer is an outstanding bearing and wear material for use in both wet and dry environments.