Menu
Sustamid 6G ESD 60 is a high-molecular and semi-crystalline thermoplastic form-polymerised Polyamide 6. Benefits of Sustamid 6G ESD 60: Good compressive strength Good machinability Electrically
PC-300/350 Coated Products offer the same static dissipative characteristics of the AC-300/350 family with the addition of increased impact strength an flammability resistance.
Sustamid 6G ESD 90 uses Nylon PA 6 which offers the toughness known from Nylon in a unique Static Dissipative product. Key attributes are high
TECAFLON PVDF ELS is a filled PVDF fluoropolymer with conductive carbon black offering an electrical conductive PVDF. It combines high thermal loading resistance, high density
Semitron® ESd 300 PET uses PET (Polyethylene terephthalate) is a polyester resin known for its toughness, chemical resistance and dimensional stability. By offering higher dimensional
Telaform SD is an electrically active composite made of acetal and a non-carbon, non-fiber filler.
PROPYLUX® CN-P is a conductive polypropylene. It is a carbon powder filled, lightweight material with good chemical resistance, and has low water absorption with surface
TIVAR® 1000 EC is a PE-UHMW grade containing specific additives rendering this material a lower surface resistivity than TIVAR 1000 ESD, improving electrical conductivity and
TECAPEEK® SD black uses PEEK as a base resin. PEEK offers excellent properties in terms of wear resistance, low coefficient of friction and low coefficient
Semitron® ESd 490 HR PEEK uses PEEK as a base resin. PEEK offers excellent properties in terms of wear resistance, low coefficient of friction and
Semitron® ESd 420V is a Static Dissipative material that uses PEI Ultem® as a base resin. Semitron® ESd 420 offers excellent stability of physical and
POMALUX® CN-P uses Acetal POM as a base resin. Acetal is an engineering thermoplastic used in precision parts requiring high stiffness, low friction and medium level dimensional
PE-UHMW / PE 1000 The ideal material where an antistatic action is required in addition to good sliding and anti-abrasion properties. Special properties: Very low
StatNot Antistatic Epoxy composite consists of woven glass and a static-dissipative epoxy resin system. This material is used when static dissipation is required from surface
Absylux CN-P is a conductive ABS (carbon powder filled). Surface Resistivity of 10^2 – 10^6 ohm/sq. Absylux CN-P is is easy to machine and fabricate.
Plastic sheet products combining the highest quality plastic substrates with clear static dissipative coatings to provide contamination and static control in ultra-clean and electrostatic discharge-safe environments.
Semitron® ESd 225 is ideal for fixturing used in manufacturing of hard disk drives or for handling in-process silicon wafers.
Semitron® ESd 410C is ideal for handling integrated circuits through the test handler environment.
Semitron® ESd 520 HR is ideal for handling integrated circuits through the test handler environment.
Reinforced with a proprietary synthetic mica.
Non-carbon filled, permanently static-dissipative material.
Modified with special dry lubricants, Tivar® DrySlide has the lowest coefficient of friction of any of the Tivar® products.
Tivar® CleanStat can cut downtime and fines build-up in a variety of applications.
Semitron® ESd 420 is ideal for handling integrated circuits through the test handler environment.
The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate.
Reinforced with a proprietary synthetic mica, Semitron® ESd 500HR offers an excellent combination of low frictional properties and dimensional stability.
Non-carbon-filled, permanently static-dissipative material, with good chemical resistance and mechanical properties.
Semitron® MP 370 offers more choices in the design and manufacture of precision test sockets for the semiconductor manufacture industry.
Carbon-powder-filled lightweight material with good chemical resistance, extremely low water absorption level, and high impact resistance (no break, notched or unnotched).
AC-300/350 Cast Acrylic Sheet Products are designed to control static electricity in applications ranging from clean room windows to industrial static control uses.
PC-300/350 Coated Products offer the same static dissipative characteristics of the AC-300/350 family with the addition of increased impact strength an flammability resistance.
Noxtat™ SD sheets are surfaced with a transparent metal and plastic coating designed to permanently control static electricity.
Carbon-powder-filled material with resistivity levels in the 10*7 – 10*11 range with high flexural strength and good thermal stability to 270°F.
Telaform SD is an electrically active composite made of acetal and a non-carbon, non-fiber filler.
The CN-P material is carbon-powder-filled, while the CN-SS is filled with small non-sloughing stainless steel fibers.
Non-sloughing carbon-fiber-filled material which is extremely strong and stiff with excellent dimensional stability.
Non-carbon-filled anti-static material which has high impact strength, good tensile and flexural strength, and is easily machined.
