DELRIN® Series Black
Unblended Delrin® AF, offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content.
Menu
Unblended Delrin® AF, offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content.
Unblended Delrin® AF, offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content.
Unblended Delrin® AF, offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content.
Unblended Delrin® AF, offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content.
Ertalyte TX is an improved wear resistant grade of PET-P with a uniformly dispersed solid lubricant that provides superior wear resistance vs. most lubricated acetals and unmodified polyesters like PBT and standard PET.
Acetron LSG stock shapes are produced from selected batches of polyacetal copolymer resin and are available in several colors for size differentiation in trial implants.
Metal Detectable Nylon 6
Fluorosint MT-01 PTFE is an extreme grade that provides stability at elevated temperatures.
Duratron® is a fully imidized thermoset polyimide.
Acetron MD copolymer acetal contains a metal detectable additive for traceability in food processing and packaging.
Outstanding wear properties.
Ertalyte® is an unreinforced, semi-crystalline thermoplastic polyester based on polyethyleneterephthalate (PET-P).
Pomalux® is a high-performance acetal copolymer that has excellent mechanical, electrical, and wear properties.
Acetron® GP is Quadrant’s general purpose copolymer acetal and is the only porosity-free acetal product available today.
Tivar® Oil Filled is the material of choice for packaging, bottling, and food processing and handling applications requiring FDA and USDA compliance.
Techtron® HPV exhibits excellent wear resistance and a low coefficient of friction.
Material Notes: Bearing grade, compression molded Techtron® polyphenylene sulfide.
Vespel® parts provide a unique combination of the physical properties of plastics, metals and ceramics.
Compression molded 30% Glass fiber reinforced polyetheretherketone.
The addition of carbon fibers enhances the compressive strength and stiffness of PEEK, and dramatically lowers its expansion rate.
This Duratron® PAI is primarily used for wear and friction parts.
This general purpose grade is unreinforced and offers the highest elongation and toughness of all PEEK grades.
Duratron® 4203 extruded PAI offers excellent compressive strength and the highest elongation of the Duratron grades.
This seal and bearing grade offers a very low coefficient of friction and good wear properties.
This grade is commonly used for dies and patterns of formed metal parts or as thermal insulators and isolators.
Duratron® 4501 PAI is well suited for general purpose wear and friction parts.
Modified Rulon® LR designed to increase the mechanical properties for slightly more load capacity with a corresponding decrease in flexibility.
Fluorosint® 500 has nine times greater resistance to deformation under load than unfilled PTFE.
A PBT polyester with outstanding wear properties; exhibiting low wear and good lubricity with a low coefficient of friction.
Fluorosint® 207’s unmatched dimensional stability, excellent creep resistance and white color uniquely position this material to serve FDA regulated applications.
Of all the unmodified nylons, Nylon 101 is the strongest, most rigid and has one of the highest melting points.
Engineering thermoplastic composite reinforced with Levlar® Aramid fiber.
Molybdenum disulphide (MoS2) filled nylon offering improved strength and rigidity.
Delrin® AF Blend is a unique thermoplastic material for use in moving parts in which low friction and long wear life are important.
The first cast nylon to combine both molybdenum disulphide (MoS2) and oil for the load capability of Nylatron® GSM nylon, plus improved frictional characteristics.
Best bearing and wear nylon product available today.
Sustamid 6G possesses high compressive strength and wear resistance and a high degree of crystalization.
Dielux® PTFE filled acetal copolymer is an outstanding bearing and wear material for use in both wet and dry environments.
Unblended Delrin® AF, offers a slightly higher limiting PV and lower coefficient of friction due to additional PTFE content.
Sustamid 6/6 possesses high wear resistance; harder, stiffer, and better dimensional stability under heat than Sustamid 6G.
